Injector Install -- The hard way. / IMG_5785 Peter Beers 11/14/2005 PedroGringo@yahoo.com

New injectors. These are 315cc injectors from Accel. I put a little vaseline on the o-rings in order to let the injectors slide into the head and fuel rail easier. If you don't do this, they don't pop in very well. It is easiest to plug in the injectors before putting them in the fuel rail. I put the injectors into the fuel rail first and put the clips on. You definitely feel them pop when the o-rings engauge. I then line them up with the holes in the had and press them in. Some folks go back for the pry bar to make sure they're competely seated. I don't find that necessary.